PHFL Series High Flow Filter Cartridge

 PHFL Series High Flow Filter Cartridge is made of diameter 6 "(152.4mm), single open end, without inner core, inside to outside flow direction. Filter body have two types: melt-blown and pleated. And pleated filter is divided into two forms: standard and crescent-shaped. End caps and filter layer using hot-melt welding, no bonding agent, with a wide range of chemical compatibility, can be applied to various fields.

Features And Benefits

Outer cage is one piece.
Filtration systems are 50% smaller than typical size system.
Inside to outside flow direction keeps all of the contamination catched.
Gradient aperture deep polypropylene fiber filter media, aperture along the fluid motion direction becomes smaller, levels intercept different sizes particles, which has excellent dirt holding capacity and low flow resistance.

Applications

  1. Petrochemical:Various solvents, chilled water, brine filtration.
  2. Power Plant: Iron removal filters element, condensate filter element, stator cooling water, etc.
  3. Industrial: Process fluid, process water, condensed water, coolant, wastewater treatment;
  4. Food and Beverage: Process water;
  5. General Purpose: RO Prefiltration, all kinds process water purification.

Technical Specifications

Dimensions(nominal)
OD: 6" (152.4mm)
Length: 20"/40"/60"
Filtration area: 7 m2/40"

Material Structure


Filter Perormance

Micron: 0.1-100μm
Maximum operating temperature: Pleated/melt-blown pp: 82℃;Pleated glass fiber: 121℃
 .
Maximum operating differential pressure(Inside to outside flow direction): Pleated/melt-blown pp:      3.44bar@82℃; Pleated glass fiber: 3.44bar@121℃ .
Suggestion pressure for filter replacement: 2.5Bar@20℃
Suggestion design flow: 40"filter: 15m3/h-25m3/h; 60"filter: 30m3/h-40m3/h
 .

Rating Curve


Ordering Information